How to Read a Commercial Roof Inspection Report
How to read a commercial roof inspection report: condition ratings, moisture findings, remaining life, priorities and budgets, explained for managers.
10 min

Short answer: a good commercial roof inspection report tells you five things: what roof you have, what condition each area is in, whether there is moisture under the membrane, how much service life is left, and what to do next with budget ranges. Read the summary and priorities first, check the photos and roof plan against the findings, and make sure every recommendation is tied to evidence.
This CLS University guide is for property managers, community association managers and owners' representatives who receive roof reports and have to turn them into decisions, budgets and board approvals.
The sections of a typical roof inspection report
Property and roof summary: address, roof areas, approximate size, roof system, age if known, and warranty status.
Executive summary: overall condition, key risks, and the recommended path (repair, restore, maintain or replace).
Roof plan: a drawing or aerial image with numbered photo locations and problem areas.
Findings by component: membrane, seams, flashings, drains, sheet metal, rooftop equipment details, penetrations.
Moisture results: infrared or moisture-meter findings, and core results when authorized.
Remaining service life: an estimate by roof area.
Recommendations and priorities: what to fix now, soon and later.
Budget ranges: costs for each recommendation, often by year.
Photos: labeled images that match the roof plan.
Start with the executive summary, then verify it
The summary should give a clear recommendation. Then check that the findings and photos support it. If a report recommends replacement, you should see evidence such as widespread wet insulation, membrane at end of life, or repeated failures that repairs cannot fix. If it recommends restoration, look for moisture data showing the roof qualifies.
Understanding condition ratings
Many reports rate each roof area on a scale such as good, fair, poor or critical, or a numeric score. Ratings are useful only if the report explains what each level means. Ask your inspector to define them in the report so ratings can be compared year to year and across properties.
Reading moisture findings
Wet insulation is the single biggest factor in the repair-vs-replace decision. Wet insulation loses its insulating value, adds weight, and can damage the deck, and it rules out a re-cover or coating in those areas. Look for:
The method used: infrared survey, moisture meter, or cores.
A map showing wet areas and their approximate size.
Core results that confirm the layers and how wet they are, if cores were authorized.
A clear statement of what percentage of the roof appears wet.
Remaining service life: what it really means
Remaining service life is an estimate of how many more years a roof area can perform with appropriate maintenance and repairs. It is not a guarantee. Use it to place replacement in your capital plan, and update it after each inspection. Our guide to roof capital expenditure forecasting shows how to turn remaining life into a budget.
Sorting priorities
Immediate: active leaks, safety hazards, loose edge metal, and anything that could cause interior damage or wind failure.
Near-term (this year): failing flashings, open seams, clogged or damaged drains, deteriorated sealants.
Planned (1 to 5 years): restoration, re-cover or replacement timed to remaining service life.
Ongoing: maintenance tasks that prevent new findings.
Questions to ask your roofing contractor
Which findings are causing leaks today, and which are future risks?
What happens if we delay each recommendation by a year?
Does the roof qualify for restoration, and what data shows that?
Will these repairs affect the manufacturer warranty?
Can the work be phased to match our budget or reserves?
What should our maintenance schedule look like after the work?
Red flags in a roof report
Recommendations with no photos or locations to support them.
A replacement recommendation with no moisture data.
A coating recommendation on a roof with significant wet insulation.
Vague budget numbers with no scope behind them.
No mention of flashings, drains or sheet metal, where most leaks start.
Turning the report into action
Share the summary and priorities with ownership or the board.
Approve immediate items right away.
Get a written scope and price for near-term items.
Place planned items in the capital plan or reserve schedule.
Start or adjust a maintenance program so the next report shows improvement.
File the report with the roof's warranty and maintenance records.
Inspection reports for portfolios
If you manage several properties, ask for one report format across all roofs. Consistent ratings, photos and budgets let you compare buildings and plan spending across the portfolio. CLS provides this through roof asset management and commercial roof inspections.
Common findings explained
Open or failed seams: the bond between membrane sheets has separated, letting water under the roof.
Flashing deterioration: the membrane or metal at walls, curbs and penetrations has cracked, pulled away or lost adhesion.
Ponding water: water remains on the roof more than about 48 hours after rain, often from clogged drains or low spots.
Blistering: pockets of air or moisture trapped between roof layers, common on asphalt roofs.
Granule loss or surface erosion: the protective surface of the roof is wearing away, exposing it to UV.
Loose edge metal or coping: perimeter metal is not fully secured, a wind risk.
Wet insulation: moisture detected below the membrane, often the deciding factor in repair vs. replace.
How photos and the roof plan work together
Every finding should have a photo number that matches a location on the roof plan. This lets you, your board and future contractors find the exact spot. When a report has photos but no plan, ask for one; when it has a plan but generic photos, ask for location-specific images. Drone imagery is especially useful on large or hard-to-access roofs because it shows the whole roof in context.
Comparing reports year to year
The most valuable roof reports are the ones you can compare over time. Keep the same inspection format, ratings and roof plan each year, and ask your contractor to note what changed: new findings, completed repairs, and any shift in remaining service life. A roof that is stable year to year is a roof whose replacement can safely be planned further out.
Sharing the report with boards and owners
Boards and owners rarely want the full technical report. Prepare a one-page summary with the overall condition, the top three priorities, the cost of acting now vs. later, and the recommended plan. Attach the full report for reference. Clear summaries speed up approvals and reduce the back-and-forth that delays repairs.
Frequently asked questions
How often should we get a roof inspection report?
At least once a year for planning, with maintenance inspections twice a year and after major storms.
Do roof reports help with insurance?
Yes. Insurers often ask for roof age and condition, and a dated report with photos is the clearest evidence.
What is the difference between an inspection and due diligence?
Due diligence is an inspection focused on a purchase or financing decision, with remaining life and budget numbers for negotiation. See pre-acquisition roof due diligence.
Want a second set of eyes on your roof? Schedule a roof inspection with drone documentation and a written report, request roof service, or call our 24/7 line at (561) 207-7693.





